Spray bottle for 'Cleaner' limescale remover

Spray bottle for our limescale remover.
The spray bottle is a great alternative to a cleaning bucket. Simply fill it with the concentrate diluted with water. Thanks to the practical label, you can quickly find the cleaning agent you need.
You can find the recommended mixing ratio below.

Mixing ratio

• For economical use, we recommend using the spray bottle
• Light limescale deposits: 3–4 tbsp per 0.5 litres of water (for even better cleaning results, add 4 ml of all-purpose cleaner), shake briefly!
• Heavy limescale deposits: 4–6 tbsp per 0.5 litres of water (for even better cleaning results, add 4 ml of all-purpose cleaner), shake briefly!
• For intensive toilet cleaning, add approx. 3 tbsp of limescale remover to the bowl; even the most stubborn uric scale can then be removed with the toilet brush in the morning.

Tips

• Limescale and dirt can be removed effortlessly. To achieve a streak-free shine on tiles, fittings, shower screens, etc., it is important to rinse thoroughly with clear water before drying, as natural fruit acids can leave a cloudy film.
• Mould in the grout: First spray the grout with anti-limescale cleaner and leave it to work for approx. 5 min, then rinse with clear water. Next, apply a small amount of scouring paste (or hand soap paste) with a sponge or brush and rub the grout to remove the mould. Rinse again and leave to dry.
• Removing mould from shower curtains: To avoid having to remove the entire curtain every time, here is a trick for removing unsightly discolouration along the bottom edge: Simply place a bucket in the shower or bath and hang the shower curtain inside it. Next, add 1–2 heaped tbsp of oxygen bleach to the bucket and fill it with very hot water. Leave for approx. 30 min, then rinse the shower curtain thoroughly with clear water.

Uses

• For hygienic cleanliness in bathrooms (toilets, baths, washbasins, tiles, shower screens, etc.)
• For the non-toxic descaling of electrical appliances (coffee machines, kettles, steam irons, washing machines, dishwashers, etc.)

Important

• After cleaning the bathroom, make sure to remove any cleaning agents from the grout – regardless of which product was used! The grout between the tiles is made on a LIMESTONE basis, and since bathroom and toilet cleaners are designed to dissolve limescale, the grout could be damaged over time
• Please note that natural fruit acids must not be used on marble or other acid-sensitive surfaces either! If in doubt, test the cleaning agent on an inconspicuous area.
• Please rinse the spray bottle thoroughly before refilling it! As it contains no preservatives, any residue may spoil

Capacity

• 0.5 litres